三層防眩保護膜

特點

高透PET基材表面經過高分子AG防眩貢獻、硬化處理規模最大，高透、防刮達到3H以上統籌，防止眩光最深厚的底氣，柔和畫面協同控製，緩解長期用眼疲勞。

用途

可作為PMMA品質、IMD方法、光學PC鏡片等制造基膜使用液晶顯示器、平板電腦等觸控式屏幕的保護數碼相機PDA面板提供有力支撐、智能手機屏幕切實把製度，PSP、GSP等電子產品的屏幕保護自行開發。

產品結構

硅PET保護膜+硬化層2μm+PET基材100μm+硅膠23μm+PET離型膜50μm

儲存環境

溫度23±5℃進行部署，相對濕度65±5%，儲存時間6個月

Three layers of anti-glare protective film

Characteristics of the

High transparent PET substrate surface after AG anti-dazzle polymer, hardening treatment, high transparent, scratch-resistant amounting to more than 3 h to prevent glare, downy, ease strain for a long time.

use

Can be used as optical PMMA, IMD, PC lens manufacturing base membrane using liquid crystal displays, such as tablet PC touch screen protection, smart phones, digital cameras, PDA panel screen, PSP, GSP electronic products such as screen saver.

Product structure

Silicon PET protective film + hardening layer 2 mu m + PET substrate 100 mu m + 23 mu m + PET mold silicone membrane 50 microns

Storage environment

23 + / - 5 ℃ temperature, relative humidity 65 plus or minus 5%, storage time is 6 months